Removing The Dummy Cover Of Bay 2 - Fujitsu PRIMERGY TX1310 M1 Upgrade And Maintenance Manual

Accessible drives

12.2.2 Removing the dummy cover of bay 2

If bay 2 will be equipped, it is necessary to break out the dummy cover of bay 2
in the front cover and to remove the EMI spring in bay 2.
I
Some chassis do not have any more the EMI spring installed in bay 2.
The pictures doesn't always show the current version.
Figure 104: Removing the dummy cover of bay 2
Ê Pull out the dummy cover of bay 2.
162 Upgrade and Maintenance Manual
TX1310 M1