Replacing Accessible Drives; Preliminary Steps; Replacing An Optical Disk Drive (Odd) - Fujitsu PRIMERGY TX1310 M1 Upgrade And Maintenance Manual

Accessible drives
12.4

Replacing accessible drives

Upgrade and Repair Unit
(URU)
Tools: Phillips PH0 / (+) No. 0 screw driver

12.4.1 Preliminary steps

"Disabling BitLocker functionality" on page 63
Ê
"Removing backup and optical disk media" on page 64
Ê
"Verifying and configuring the backup software solution" on page 65
Ê
"Shutting down the server" on page 40
Ê
"Disconnecting the server from the mains" on page 41
Ê
"Removing the side cover" on page 42
Ê

12.4.2 Replacing an optical disk drive (ODD)

Ê Remove the defective optical disk drive as described in section
an optical disk drive (ODD)" on page
Figure 126: Removing the fixation plate
Ê Remove the fixation plate from of the left side of the optical disk drive.
178 Upgrade and Maintenance Manual
Hardware: 15 minutes
173.
"Removing
TX1310 M1