Concluding Steps - Fujitsu PRIMERGY TX1310 M1 Upgrade And Maintenance Manual

Figure 152: Removing the TPM spacer
Ê Using a flat nose pliers, press together the hooks on the TPM spacer and
remove it from the system board.
I
If the TPM is to be replaced, the TPM spacer may remain on the
system board.
Ê Install the system board as described in section
board" on page

14.3.2.3 Concluding steps

"Installing the HDD cage" on page 59
Ê
"Installing the front cover" on page 48
Ê
Ê Install all removed accessible drives as described in section
accessible drives" on page
"Installing the side cover" on page 53
Ê
"Connecting the server to the mains" on page 54
Ê
"Switching on the server" on page 55
Ê
TX1310 M1
212.
49.
Upgrade and Maintenance Manual
System board and components
"Installing the new system
"Installing
203