Concluding Steps - Fujitsu PRIMERGY TX1310 M1 Upgrade And Maintenance Manual

9.3.3.4

Concluding steps

"Installing the side cover" on page 53
Ê
"Connecting the server to the mains" on page 54
Ê
"Switching on the server" on page 55
Ê
"Enabling replaced components in the system BIOS" on page 70
Ê
"Looking up changed MAC / WWN addresses" on page 76
Ê
"Updating the NIC configuration file in a Linux environment" on page 73
Ê
Ê If applicable, reconfigure your network settings in the operation system
according to the original configuration of the replaced controller (expansion
card or onboard).
I
Configuration of network settings should be performed by the
customer.
For further information, please refer to section
settings recovery" on page
"Enabling BitLocker functionality" on page 74
Ê
Ê If applicable, "After replacing / upgrading LAN controllers" on page 77
TX1310 M1
130.
Upgrade and Maintenance Manual
Expansion cards and backup units
"Note on network
131