Preliminary Steps; Removing The Defective Tpm; Installing The New Tpm; Concluding Steps - Fujitsu PRIMERGY TX150 S8 Upgrade And Maintenance Manual

System board and components

14.4.3.1 Preliminary steps

"Disabling or suspending BitLocker functionality" on page 79
Ê
"Locating the defective server" on page 47
Ê
"Shutting down the server" on page 50
Ê
"Disconnecting the server from the mains" on page 50
Ê
"Getting access to the component" on page 51
Ê
"Removing the system fan holder" on page 76
Ê

14.4.3.2 Removing the defective TPM

Ê Remove the TPM as described in section
Ê Leave the TPM spacer on the system board when removing the defective
TPM.

14.4.3.3 Installing the new TPM

Ê The TPM spacer is already present on the system board (see
TPM spacer" on page
Ê Install the TPM as described in section

14.4.3.4 Concluding steps

"Installing the system fan holder" on page 77
Ê
"Reassembling" on page 64
Ê
"Connecting the server to the mains" on page 74
Ê
"Switching on the server" on page 75
Ê
"Enabling BitLocker functionality" on page 100
Ê
370
363).
Upgrade and Maintenance Manual
"Removing the TPM" on page
"Installing the TPM" on page
TX150 S8 / TX200 S7
365.
"Installing the
361.