Concluding Steps - Fujitsu PRIMERGY TX1310 M1 Upgrade And Maintenance Manual

Front panel and front USB
Figure 144: Installing the front USB module
Ê Place the new front USB module in the direction shown and secure it with
four screws (see circles).
Ê Connect the front USB cable to the front USB connector on the system
board.

13.2.4 Concluding steps

"Installing the HDD cage" on page 59
Ê
"Installing the front cover" on page 48
Ê
Ê Install all removed accessible drives as described in section
accessible drives" on page
"Installing the side cover" on page 53
Ê
"Connecting the server to the mains" on page 54
Ê
"Switching on the server" on page 55
Ê
"Enabling BitLocker functionality" on page 74
Ê
192
49.
Upgrade and Maintenance Manual
"Installing
TX1310 M1