Before you start
2.3
Tools you need at hand
When preparing the maintenance task, ensure that all required tools are
available according to the overview below. You will find a list of required tools at
the beginning of each procedure.
Screw driver /
Bit insert
Phillips
PH2 / (+) No. 2
hexagonal cross
SW5 / PZ2
Phillips
PH0 / (+) No. 0
TPM bit insert
Dedicated TPM
screw driver /
TPM module
fixing tool (for the
Japanese market)
Phillips
PH1 / (+) No. 1
Phillips
PH2
hexagonal cross
SW5
Hexagon bolt
Table 2: List of required tools and used screws
24
Screw
Upgrade and Maintenance Manual
Usage
Type
System
M3 x 4.5 mm
board, slot
(silver)
bracket,
C26192-Y10-C67
chassis
Slimline ODD M2 x 2.5 mm
(silver)
C26192-Y10-C62
TPM screw
REM 3 x 15 mm
One way
(black)
head
C26192-Y10-C176
(black)
TFM
M2.5 x 4 mm
(silver)
C26192-Y10-C103
System fans
M5.0 x 16 mm
(silver)
C26361-K1015-C98
UNC #4-40
Front VGA
(silver)
connector
V26827-B408-V989
TX1310 M1