Removing The Defective Tpm; Installing The New Tpm; Concluding Steps - Fujitsu PRIMERGY TX1310 M3 Upgrade And Maintenance Manual

System board and components

15.3.3.2 Removing the defective TPM

Ê Remove the TPM, see section
Ê Leave the TPM spacer on the system board when removing the defective
TPM.

15.3.3.3 Installing the new TPM

I
The TPM spacer is already present on the system board.
Ê Install the new TPM, see section

15.3.3.4 Concluding steps

Ê Install all expansion cards, see section
I
Make sure that you reinstall each card in the slot it was located before
the replacement.
"Reassembling" on page 51
Ê
"Connecting the power cord" on page 56
Ê
"Switching on the server" on page 57
Ê
"Resuming BitLocker functionality" on page 70
Ê
194
"Removing the TPM" on page
"Installing the TPM" on page
Upgrade and Maintenance Manual
"Expansion cards" on page
191.
186.
113.
TX1310 M3