Connecting The Server To The Mains - Fujitsu PRIMERGY TX1310 M1 Upgrade And Maintenance Manual

Basic hardware procedures
4.6

Connecting the server to the mains

The standard power supply unit that automatically adjusts to any mains voltage
in the range of 100 VAC to 240 VAC.
V
CAUTION!
The power supply automatically adjusts to any mains voltage in the
range of 100 VAC to 240 VAC. You may only operate the server if its
rated voltage range corresponds to the local mains voltage.
Ê Connect the power cord to the power supply unit.
Ê Connect the mains plug to a grounded mains outlet in the in-house power
supply network.
Securing power cord
Figure 15: Securing the power cord
Ê Loop the cable past the cable tie mounting bracket as shown.
Ê Close the cable tie around the power cord (1) and pull tight (2) to secure the
power cord.
54 Upgrade and Maintenance Manual
TX1310 M1