Concluding Steps - Fujitsu PRIMERGY TX1310 M1 Upgrade And Maintenance Manual

Figure 125: Installing the dummy drive in bay 2
Ê Insert the dummy drive in bay 2 and carefully push it in until it locks in place.
I
The dummy drive is a little harder to insert than an ODD and the bezel of
the drive is touching the front panel.

12.3.6 Concluding steps

Ê Remove the fixation plates from the removed accessible drives.
Ê Secure the fixation plates on the chassis.
"Installing the side cover" on page 53
Ê
"Connecting the server to the mains" on page 54
Ê
"Switching on the server" on page 55
Ê
"Verifying and configuring the backup software solution" on page 69
Ê
"Enabling BitLocker functionality" on page 74
Ê
TX1310 M1
Upgrade and Maintenance Manual
Accessible drives
177