Replacing A Backup Drive - Fujitsu PRIMERGY TX1310 M1 Upgrade And Maintenance Manual

Figure 130: Removing the slimline ODD from the slide-in unit (B)
Ê Remove the M2 x 2.5 mm screw from the right side of the slide-in unit.
Ê Remove the slimline ODD drive from the slide-in unit.
Ê Install the new slimline ODD as described in section
optical disk drive (ODD)" on page

12.4.4 Replacing a backup drive

Ê Remove the defective backup drive as described in section
backup drive" on page
Figure 131: Removing the fixation plate
Ê Remove the fixation plate from the left side of the backup drive.
TX1310 M1
167.
175.
Upgrade and Maintenance Manual
Accessible drives
"Installing a slimline
"Removing a
181