Configuring Dscp Mapping - Linksys SFE1000P Administration Manual

Configuring DSCP Mapping

The DSCP Mapping Page enables mapping Differentiated Services Code Point (DSCP) values from
incoming packets to DSCP values in outgoing packets. This information is important when traffic
exceeds user-defined limits.
1. Click Quality of Service > Advanced Mode > DSCP Mapping. The DSCP Mapping Page opens:
2. Define the relevant fields.
3. Click Logout. The DSCP settings are modified, and the device is updated.
Chapter 13: Configuring Quality of Service
Defining Advanced Mode
SFE1000P Gigabit Ethernet Switch Administration Guide
DSCP Mapping Page
Chapter
13
105