Configuring Multicast Forwarding
The Multicast section contains the following pages:
•
IGMP Snooping
•
Defining Multicast Bridging Groups
•
Defining Multicast Forwarding
IGMP Snooping
When IGMP Snooping is enabled globally, all IGMP packets are forwarded to the CPU. The CPU
analyzes the incoming packets and determines:
•
Which ports want to join which Multicast groups.
•
Which ports have Multicast routers generating IGMP queries.
•
Which routing protocols are forwarding packets and Multicast traffic.
Ports requesting to join a specific Multicast group issue an IGMP report, specifying that Multicast
group is accepting members. This results in the creation of the Multicast filtering database.
To enable IGMP Snooping:
1. Click Bridging > Multicast > IGMP Snooping. The IGMP Snooping Page opens:
2. Define the relevant fields.
3. Click Apply. The IGMP Global Parameters are updated, and the device is updated.
Chapter 10: Configuring Multicast Forwarding
IGMP Snooping
SFE1000P Gigabit Ethernet Switch Administration Guide
IGMP Snooping Page
Chapter
10
69