•
The port is in full-duplex mode.
•
All ports in the LAG have the same ingress filtering and tagged modes.
•
All ports in the LAG have the same back pressure and flow control modes.
•
All ports in the LAG have the same priority.
•
All ports in the LAG have the same transceiver type.
•
The device supports up to 8 LAGs, and eight ports in each LAG.
•
Ports can be configured as LACP ports only if the ports are not part of a previously
configured LAG.
Ports added to a LAG lose their individual port configuration. When ports are removed from the
LAG, the original port configuration is applied to the ports.
To define LAG management:
1. Click Bridging > Port Management > LAG Management. The LAG Management Page opens:
2. Define the relevant fields.
3. Click Apply. LAG Management is defined, and the device is updated.
Chapter 6: Configuring Device Interfaces
Defining LAG Management
SFE1000P Gigabit Ethernet Switch Administration Guide
LAG Management Page
Chapter
6
46