Modifying Protocol Groups; Defining Vlan Protocol Port - Linksys SFE1000P Administration Manual

Modifying Protocol Groups

The Protocol Group Settings Page provides information for configuring existing VLAN protocol
groups.
1. Click Bridging > VLAN Management > Protocol Group. The Protocol Group Page opens:
2. Click the Edit Button. The Protocol Group Settings Page opens:
3. Define the relevant fields.
4. Click Apply. The Protocol group is modified, and the device is updated.

Defining VLAN Protocol Port

The Protocol Port Page adds interfaces to Protocol groups.
To define the protocol port:
1. Click Bridging > VLAN Management > Protocol Port. The Protocol Port Page opens:
2. Click the Add Button. The Add Protocol Port to VLAN Page opens:
Chapter 7: Configuring VLANs
Defining VLAN Protocol Port
SFE1000P Gigabit Ethernet Switch Administration Guide
Protocol Group Settings Page
Protocol Port Page
Chapter
7
58