Getting Started
This section provides an introduction to the user interface, and includes the following topics:
•
Starting the Application
•
Understanding the Interface
•
Using the Linksys Management Buttons
•
Using Screen and Table Options
•
Resetting the Device
•
Logging Off The Device
The following diagram illustrates how the SFE1000P fits into your network.
Starting the Application
This section contains information for starting the Linksys User Interface.
NOTE: By default, the IP address of the device is assigned
dynamically. The IP address can be changed.
To open the User Interface:
1. Open a web browser.
2. Enter the device's IP address in the address bar and press Enter. An "Enter Network Password
Page" opens:
Chapter 2: Getting Started
Starting the Application
SFE1000P Gigabit Ethernet Switch Administration Guide
Chapter
2
3