Modifying VLANs
1. Click Bridging > VLAN Management > Properties. The Properties Page opens.
2. Click Edit. The Edit VLAN Page opens:
3. Define the relevant fields.
4. Click Apply. The VLAN Settings are defined, and the device is updated.
Defining VLAN Membership
The VLAN Membership Page contains a table that maps VLAN parameters to ports. Ports are
assigned VLAN membership by toggling through the Port Control settings.
1.
Click Bridging > VLAN Management > Membership. The VLAN Membership Page opens:
2. Define the relevant fields.
3. Click Apply. VLAN membership is defined, and the device is updated.
Chapter 7: Configuring VLANs
Defining VLAN Membership
SFE1000P Gigabit Ethernet Switch Administration Guide
Edit VLAN Page
Membership Page
Chapter
7
53