Modifying QoS Policy Binding Settings
1. Click Quality of Service > Advanced > Policy Binding. The Policy Binding Page opens:
2. Click the Edit button. The Edit QoS Policy Binding Page opens:
3. Define the relevant fields.
4. Click Apply. The QoS policy binding is defined, and the device is updated.
Defining QoS Basic Mode
The Basic Mode Page contains information for enabling Trust on the device. Packets entering a QoS
domain are classified at the edge of the QoS domain.
1. Click Quality of Service > Basic Mode. The Basic Mode Page opens:
In the DSCP Mapping Page, define the Differentiated Services Code Point (DSCP) tag to use in
place of the incoming DSCP tags.
2. Click the DSCP Rewrite button. The DSCP Mapping Page opens:
Chapter 13: Configuring Quality of Service
Defining Advanced Mode
SFE1000P Gigabit Ethernet Switch Administration Guide
Edit QoS Policy Binding Page
Basic Mode Page
Chapter
13
112