Adding An Ip Based Rule; Defining Acl Binding - Linksys SFE1000P Administration Manual

Adding an IP Based Rule

1. Click Security Suite > Access Control > IP Based ACL. The IP Based ACL Page opens:
2. Click the Add ACL Rule button. The Add IP Based Rule Page opens:
3. Select either Match DSCP or Match IP.
4. Click Apply. The IP based rule settings are modified, and the device is updated.

Defining ACL Binding

When an ACL is bound to an interface, all the ACE rules that have been defined are applied to the
selected interface. Whenever an ACL is assigned on a port or a LAG flows from that ingress interface
that do not match the ACL are matched to the default rule, which is Drop unmatched packets.
Chapter 5: Configuring Device Security
Defining Access Control
SFE1000P Gigabit Ethernet Switch Administration Guide
Add IP Based Rule Page
Chapter
5
40