Defining Stp Properties - Linksys SFE1000P Administration Manual

Defining STP Properties

The STP Properties Page contains parameters for enabling STP on the device. The STP Properties
Page is divided into three areas, Global Settings, Bridge Settings. and Designated Root.
1. Click Bridging > Spanning Tree > Properties. The STP Properties Page opens:
2. Define the relevant fields.
3. Click Apply. STP is enabled, and the device is updated.
Chapter 11: Configuring Spanning Tree
Defining STP Properties
SFE1000P Gigabit Ethernet Switch Administration Guide
STP Properties Page
Chapter
11
75