Mapping Dscp To Queue - Linksys SFE1000P Administration Manual

2. Define the relevant fields.
3. Click Apply. CoS to queues are mapped, and the device is updated.

Mapping DSCP to Queue

The DSCP to Queue Page enables mapping DSCP values to specific queues.
To map DCSP to Queues:
1. Click Quality of Service > General > DSCP to Queue. The DSCP to Queue Page opens:
2. Define the relevant fields.
3. Click Apply. DSCP to queues are mapped, and the device is updated.
Chapter 13: Configuring Quality of Service
Defining General Settings
SFE1000P Gigabit Ethernet Switch Administration Guide
Cos to Queue Page
DSCP to Queue Page
Chapter
13
102