Modifying Vlan Membership; Defining Interface Settings - Linksys SFE1000P Administration Manual

Modifying VLAN Membership

1. Click Bridging > VLAN Management > Membership. The VLAN Membership Page opens:
2. Click the Edit button. The Edit VLAN Membership Page opens:
3. Define the relevant fields.
4. Click Apply. VLAN Membership is modified, and the device is updated.

Defining Interface Settings

The VLAN Interface Setting Page provides parameters for managing ports that are part of a VLAN.
The port default VLAN ID (PVID) is configured on the VLAN Port Settings page. All untagged packets
arriving to the device are tagged by the ports PVID.
1. Click Bridging > VLAN Management > Interface Setting. The VLAN Interface Setting Page
opens:
2. Define the relevant fields.
Chapter 7: Configuring VLANs
Defining Interface Settings
SFE1000P Gigabit Ethernet Switch Administration Guide
Edit VLAN Membership Page
Interface Setting Page
Chapter
7
54