Modifying Igmp Snooping; Defining Multicast Bridging Groups - Linksys SFE1000P Administration Manual

Modifying IGMP Snooping

1. Click Bridging > Multicast > ICMP Snooping. The IGMP Snooping Page opens:
2. Click the Edit button. The Edit IGMP Snooping Page:
3. Define the relevant fields.
4. Click Apply. The IGMP Global Parameters are modified, and the device is updated.

Defining Multicast Bridging Groups

The Multicast Group page displays the ports and LAGs that are members of Multicast service
groups. The Port and LAG tables also reflect the manner in which the port or LAGs joined the
Multicast group. Ports can be added either to existing groups or to new Multicast service groups.
Multicast Group Page permits new Multicast service groups to be created. The Multicast Group Page
also assigns ports to a specific Multicast service address group.
Chapter 10: Configuring Multicast Forwarding
Defining Multicast Bridging Groups
SFE1000P Gigabit Ethernet Switch Administration Guide
Edit IGMP Snooping Page
Chapter
10
The
70