Appendix F: Safety Information; Meaning Of The Warning Symbol; General Safety Information - Linksys SFE1000P Administration Manual

Safety Information
The following statements are warnings or safety guidelines. A warning means danger. You are in a
situation that could cause bodily injury. Before working on equipment, be aware of the hazards
involved with electrical circuitry and standard safety practices to prevent accidents.

Meaning of the Warning Symbol

IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. This symbol is used to
indicate a situation that could cause bodily injury. Before you
work on any equipment, be aware of the hazards involved with
electrical circuitry and be familiar with standard practices for
preventing accidents.

General Safety Information

WARNING: Work During Lightning Activity
Do not work on the system or connect or disconnect cables
during periods of lightning
WARNING: Installation Instructions
Read the installation instructions before connecting the system
to the power source
WARNING: SELV Circuit
To avoid electric shock, do not connect safety extra-low voltage
(SELV) circuits to telephone-network voltage (TNV) circuits. LAN
ports contain SELV circuits, and WAN ports contain TNV circuits.
Some LAN and WAN ports both use RJ-45 connectors. Use
caution when connecting cables.
WARNING: Equipment Installation
Only trained and qualified personnel should be allowed to
install, replace, or service this equipment.
Appendix F:
Meaning of the Warning Symbol
SFE1000P 8-port 10/100 Ethernet Switch with PoE Administration Guide
Appendix
F
162