Defining Lag Settings - Linksys SFE1000P Administration Manual

Defining LAG Settings

Link Aggregated Groups optimize port usage by linking a group of ports together to form a single
aggregated group. Link aggregated groups multiply the bandwidth between the devices, increase
port flexibility, and provide link redundancy.
The LAG Settings Page contains fields for configuring parameters for configured LAGs. The device
supports up to eight ports per LAG, and eight LAGs per system.
1. Click Bridging > Port Management > LAG Settings. The LAG Settings Page opens:
2. Edit button. The LAG Configuration Settings opens:
Click the
Chapter 6: Configuring Device Interfaces
Defining LAG Settings
SFE1000P Gigabit Ethernet Switch Administration Guide
LAG Settings Page
Chapter
6
48