Modify Lacp Parameter Settings - Linksys SFE1000P Administration Manual

To define LACP:
1. Click Bridging > Port Managing > LACP. The LACP Page opens:
2. Define the relevant fields.
3. Click Apply. The LACP settings are modified, and the device is updated.

Modify LACP Parameter Settings

1. Click Bridging > Port Managing > LACP. The LACP Page opens:
2. Click the Edit button. The Edit LACP Page opens:
3. Define the relevant fields.
4. Click Apply. The LACP Parameters settings are defined, and the device is updated.
Chapter 6: Configuring Device Interfaces
Configuring LACP
SFE1000P Gigabit Ethernet Switch Administration Guide
LACP Page
Edit LACP Page
Chapter
6
50