Configuring The Router - Linksys WRT54G Configuration Note

Configuring the Router

Once you've connected to the router, follow these steps to configure it to work with LucidLink
software.
IP Addresses
1 In Internet Connection Type, choose from list based on information from your ISP.
2 In the Router IP section, enter:
o Local IP Address IP address for Router
o Subnet Mask  Portion of your internal wired LAN shared by the router and the
LucidLink Server computer.
3 In Network Address Server Settings (DHCP) section, enter:
o DHCP  Enable
o Starting IP Address  100.
o Number of DHCP Users  50
4 In Time Settings section:
o Choose the appropriate Time Zone for the router.
o Select Daylight Saving settings if appropriate.
Leave defaults for rest of page.
5 Click Save Settings.
6 Click Continue
Interlink Networks, Inc.
Linksys WRT54G Router.doc 11/8/2004 2:11 PM
Linksys Wireless G WRT54G
Page 4 of 9