Appendix
A
SFE1000P 8-port 10/100 Ethernet Switch with PoE Administration Guide
Console Interface Configuration
Overview
The SFE1000P features a menu-driven console interface for basic configuration of the Switch and
management of your network. The Switch can be configured using CLI through the console interface
or through a telnet connection. This chapter describes console interface configuration. Configuration
can also be performed through the web utility.
Configuring the HyperTerminal Application
Before you use the console interface, you will need to configure the HyperTerminal application on
your PC.
1. Click the Start button. Select Programs and choose Accessories. Select Communications. Select
HyperTerminal from the options listed in this menu.
Finding HyperTerminal
Appendix A:
144
Overview