Linksys SFE1000P Administration Manual page 102

Traps indicating status changes are issued by the switch to specified trap managers. Specify the trap
managers so that key events are reported by this switch to the management station. Specify up to
five management stations that receive authentication failure messages and other trap messages from
the switch.
1. Click System > SNMP > Security > Trap Management > Station Management. The Station
Management Page opens:
2. Click the Add button. The Add SNMP Notification Recipient Page opens.
Chapter 12: Configuring SNMP
Defining Trap Management
SFE1000P Gigabit Ethernet Switch Administration Guide
Station Management Page
Chapter
12
94