Defining Queue
The Queue Page contains fields for defining the QoS queue forwarding types.
1. Click Quality of Service > General > Queues. The Queue Page opens:
2. Define the queues.
3. Click Apply. The queues are defined, and the device is updated.
Mapping CoS to Queue
The Cos to Queue Page contains fields for classifying CoS settings to traffic queues.
1. Click Quality of Service > General > CoS to Queue. The Cos to Queue Page opens:
Chapter 13: Configuring Quality of Service
Defining General Settings
SFE1000P Gigabit Ethernet Switch Administration Guide
Queue Page
Chapter
13
101