Resetting The Device; Logging Off The Device - Linksys SFE1000P Administration Manual

4. Click the Delete button. The information is deleted, and the device is updated.

Resetting the Device

The Reset page enables the device to be reset from a remote location. Save all changes to the
Running Configuration file before resetting the device. This prevents the current device configuration
from being lost. To reset the device:
1. Click System > General > Reset. The Reset page opens.
2. Click the Reset button. The device is reset, and a prompt for a user name and password is
displayed.
3. Enter a user name and password to reconnect to the Web Interface, if the device is not part of a
full Linksys One system. If the device is part of a Linksys One system, login is automatically done
from the Service Router.

Logging Off The Device

Click . The system logs off. The Embedded Web System Home Page closes.
Chapter 2: Getting Started
Resetting the Device
SFE1000P Gigabit Ethernet Switch Administration Guide
Reset Page
Chapter
2
9