Modifying Acl Binding; Defining Dos Prevention - Linksys SFE1000P Administration Manual

1. Click Security Suite > Access Control > ACL Binding. The ACL Binding Page opens
2. Define the relevant fields.
3. Click Apply. The ACL binding settings are modified, and the device is updated.

Modifying ACL Binding

1. Click Security Suite > Access Control > ACL Binding. The ACL Binding Page opens:
2. Click the Edit button. The Edit ACL Binding Page opens:
3. Define the relevant fields.
4. Click Apply. ACL binding is defined, and the device is updated.

Defining DoS Prevention

The DoS Prevention section contains the following pages:
• Global Settings
• Defining Martian Addresses
Chapter 5: Configuring Device Security
Defining DoS Prevention
SFE1000P Gigabit Ethernet Switch Administration Guide
ACL Binding Page
Edit ACL Binding Page
Chapter
5
41