Linksys SFE1000P Administration Manual page 153

2. On the Connection Description screen, enter a name for this connection. In the example, the
name of connection is SFE1000P. Select an icon for the application. Then, click the OK button.
3. On the Connect To screen, select a port to communicate with the Switch: COM1, COM3, or
TCP/IP.
Appendix A:
Configuring the HyperTerminal Application
SFE1000P 8-port 10/100 Ethernet Switch with PoE Administration Guide
Connection Description
Connect To Screen
Appendix
A
145