Defining Policy Binding - Linksys SFE1000P Administration Manual

Defining Policy Binding

In the Policy Binding Page, QoS policies are associated with specific interfaces.
1. Click Quality of Service > Advanced > Policy Binding. The Policy Binding Page opens:
2. Click the Add button. The Add QoS Policy Binding Page opens:
3. Define the relevant fields.
4. Click Apply. The QoS Policy Binding is defined, and the device is updated.
Chapter 13: Configuring Quality of Service
Defining Advanced Mode
SFE1000P Gigabit Ethernet Switch Administration Guide
Policy Binding Page
Add QoS Policy Binding Page
Chapter
13
111