3. Define the relevant fields.
4. Click Apply. The Aggregate policer is added, and the device is updated.
Modifying QoS Aggregate Policer
1. Click Quality of Service > Advanced > Aggregate Policer. The Aggregate Policer Page opens:
2. Click the Edit Button. The Edit QoS Aggregate Policer Page opens:
3. Modify the relevant fields.
4. Click Apply. QoS aggregate policer settings are modified, and the device is updated.
Chapter 13: Configuring Quality of Service
Defining Advanced Mode
SFE1000P Gigabit Ethernet Switch Administration Guide
Add QoS Aggregate Policer Page
Edit QoS Aggregate Policer Page
Chapter
13
108