Download Print this page

Linksys SFE1000P Product Data

8-port 10/100 ethernet switch with poe
Hide thumbs Also See for SFE1000P:

Advertisement

Linksys One-Ready, Secure, Reliable,
Managed Ethernet Switching with PoE
The SFE1000P is an 8-port fully-managed 10/100 Ethernet switch with 2 Gigabit
copper or optical interfaces for connecting to a core switch. It is Linksys One-
Ready, allowing it to be used in both Linksys One and non-Linksys One networks. Its
intelligence, small size and fan-less design make it ideal for a small office, conference
room, or training room.
For wireless or Voice Over IP (VoIP) deployments, the SFE1000P supports the IEEE
802.3af standard for Power over Ethernet (PoE). With automatic load sensing, the power
control circuitry automatically detects PoE on end devices before providing power. (PoE
is limited to the fixed 10/100 Base-T/TX ports.) The unit can provide maximum output
power of up to 15.4W per PoE port on 4 ports, or up to 7.5W per PoE port on 8 ports
simultaneously. The unit provides independent overload and short-circuit protection for
each port. LED indicators indicate the power status for each PoE port.
With the enhanced quality of service (QoS) and traffic-management features provided by
the SFE1000P, voice and video data can be prioritized, ensuring clear and reliable voice
communications. An intuitive, secure management interface enables you to easily set up the
QoS parameters, along with the other advanced security and performance features, resulting
in an optimized, more secure network.
Linksys One integrates data networking and low-cost VoIP service with applications and
other business services into one simple solution for small businesses. Because the SFE1000P
is Linksys One-Ready, it can be seamlessly integrated into a Linksys One data or data/voice
network. Linksys One technology is automatic and self-configuring. Once connected, a Linksys
One Service Router will discover the SFE1000P, automatically configure it, and make it available
to other users on the network.
Provides IEEE 802.3af PoE
Dual gigabit uplinks
to IP phones, cameras, or
provide increased
access points
bandwidth and
redundancy
8-Port 10/100 Ethernet
Switch with PoE
SFE1000P
Model:
Provides maximum security
Linksys One-Ready—
and traffic control with
simple, automated
policing, shaping, access
installation with
control lists, and QoS
Linksys One services
routers present
SFE1000P
PRODUCT DATA
BUSINESS SERIES

Advertisement

loading

Summary of Contents for Linksys SFE1000P

  • Page 1 It is Linksys One- Ready, allowing it to be used in both Linksys One and non-Linksys One networks. Its intelligence, small size and fan-less design make it ideal for a small office, conference room, or training room.
  • Page 2 IEEE 802.1x Access Control Lists (ACLs) BUSINESS SERIES Availability Link Aggregation Storm Control Spanning Tree SFE1000P 8 RJ-45 connectors for 10BASE-T and 100BASE-TX 2 RJ-45 connectors for 10BASE-T/100BASE-TX/1000BASE-T with 2 SFP slots Console port Auto MDI/MDI-X Auto-negotiate/Manual setting None UTP CAT 5 or better for 10BASE-T/100BASE-TX...
  • Page 3: Minimum Requirements

    10 to 95%, Non-condensing Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright © 2008 Cisco Systems, Inc. All rights reserved. Other brands and product names are trademarks or registered trademarks of their respective holders.