Linksys SFE2010P Product Data

Ethernet Switch with 48-Port 10/100,
2 10/100/1000 Copper Ports, 2 SFP
Slots, and PoE
The Linksys SFE2010P Managed switch with WebView allows you to expand your
network securely. Configuration of the switch is secured using SSL for Web access.
The SFE2010P is optimized for maximum system availability with fully-redundant
stacking, redundant power options, and dual images for resilient firmware upgrades.
The switch secures the network through IEEE 802.1Q VLANs, IEEE 802.1X port
authentication, Access Control Lists (ACL), DOS Prevention, and MAC-based filtering.
The enhanced QoS and traffic-management features ensure clear and reliable voice and
video communications.
For wireless or VoIP deployments, the SFE2010P supports the IEEE802.3af standard for
Power over Ethernet (PoE). With automatic load sensing, the power-control circuitry
automatically detects PoE on the end device before providing power. For safety, each
port has independent overload and short-circuit protection, along with LED indicators
to show power status. It provides 15W of available PoE power on up to 24 of the FE ports
for powering PoE-enabled wireless AP or VoIP handsets. The maximum PoE available per
device for all ports is 360W.
The SFE2010P provides resilient stacking for up to 4 units, or 192 ports. A stack of units is
managed as a single switch with one web management interface. The SFE2010P can coexist
in a stack with Linksys SFE2xxx/P 24-port and 48-port switches such as the Linksys SFE2000,
SFE2000P, and the SFE2010, for a maximum of 192 ports in a stack. The stacking functionality
includes master/backup unit behavior, ring and chain architecture, and hot insertion and
removal of units.
Software running on the SFE2010P Ethernet Switch interacts with provisioning, management,
and security software on both the site's services router and the service provider's equipment.
This interaction provides a simple, one-step installation and access to web-administered features
for the administrator and users. Simple, affordable network operations throughout the network's
lifetime are the result.
Optimized for growing Fully-resilient stacking
businesses, providing 48 provides optimized
10/100 Mbps ports growth with simplified
management
48-Port 10/100 Ethernet
Switch with PoE
SFE2010P
Model:
Provides IEEE 802.3af PoE Maximum security and
to a phone, camera, or control of traffic with
access point policing, shaping, ACLs,
and QoS
SFE2010P
PRODUCT DATA
BUSINESS SERIES