Connecting To The Sfe1000P Through A Telnet Session - Linksys SFE1000P Administration Manual

Connecting to the SFE1000P through a Telnet Session

1. Open a command line editor and enter telnet <ip address of the device>. Then, press the Enter
key.
2. The Login screen will now appear. The first time you open the command line interface, select Edit
and hit Enter. Enter admin in the User Name field. Leave the Password field blank.
3. Press the Esc button and you will return to the login screen. Use the right arrow button to
navigate to Execute and press the Enter button to enter the CLI interface.
Appendix A:
Connecting to the SFE1000P through a Telnet Session
SFE1000P 8-port 10/100 Ethernet Switch with PoE Administration Guide
Appendix
A
147