Defining CoS
The CoS Page contains fields for enabling or disabling CoS (Basic or Advanced mode). In addition,
the default CoS for each port or LAG is definable.
1. Click Quality of Service > General > CoS. The CoS Page opens:
2. Define the relevant fields.
3. Click Apply. The CoS settings are modified, and the device is updated.
Modifying Interface Priorities
1. Click Quality of Service > General > CoS. The CoS Page opens:
2. Click the Edit button. The Edit Interface Priority Page opens:
3. Modify the Interface priority.
4. Click Apply. The Interface priority is set, and the device is updated.
Chapter 13: Configuring Quality of Service
Defining General Settings
SFE1000P Gigabit Ethernet Switch Administration Guide
CoS Page
Edit Interface Priority Page
Chapter
13
100