Table of Contents
Advertisement
4.4.9.3 Device Management
The Device Management Advanced Configuration settings allow you to control your router's security
options and device monitoring features.
Device Name
Name: Enter a name for this device.
Web Server Settings
HTTP Port: This is the port number the router's embedded web server (for web-based configuration) will
use. The default value is the standard HTTP port, 80. Users may specify an alternative if, for example, they
are running a web server on a PC within their LAN.
Management IP Address: You may specify an IP address allowed to logon and access the router's web
server. Setting the IP address to 0.0.0.0 will disable IP address restrictions, allowing users to login from any
IP address.
Expire to auto-logout: Specify a time frame for the system to auto-logout the user's configuration session.
Example: User A changes HTTP port number to 100, specifies their own IP address of 192.168.1.100 and
sets the logout time to be 100 seconds. The router will only allow User A access from the IP address
192.168.1.100 to logon to the Web GUI by typing: http://192.168.1.1:100 in their web browser. After 100
seconds, the device will automatically logout User A.
4.5 Save Configuration To Flash
After changing the router's configuration settings, you must save all of the configuration parameters to flash
memory to avoid them being lost after turning off or resetting your router. Click Apply to write your new
configuration to flash memory.
Multi-Homing Security Gateway User's Manual
- 80 -
Advertisement
Table of Contents
