Outbound Load Balancing - Planet Networking & Communication MH-1000 User Manual

Multi-Homing Security Gateway User's Manual
Step 3: Go to Configuration > Dual WAN > General Settings. Select the Fail Over radio button. Under
Connectivity Decision, input the number of times MH-1000 should probe the WAN before deciding that the
ISP is in service or not (3 by default). Next, input the duration of the probe cycle (30 sec. by default) and
choose the way WAN ports are probed.
Please ensure the WAN ports are functioning by performing a ping operation on each before proceeding.
Finally, choose whether or not MH-1000 should fail back to WAN1.
Step 4: Click Save Config to save all changes to flash memory.
D.2 Outbound Load Balancing
192.168.2.2
230.100.100.1
ISP
213.100.100.2
192.168.2.3
With Outbound Load Balancing, you can improve upload performance by optimizing your connection via
Dual WAN. To do this, follow these steps:
Step 1: Go to Configuration > WAN > ISP Settings. Configure your WAN1 ISP settings and click Apply.
- 103 -