Planet Networking & Communication MH-1000 User Manual page 30

If your ISP provides a PPTP connection, you can use the PPTP protocol to
PPTP
establish a connection to your ISP.
The Big Pond login for Telstra cable in Australia.
Big Pond
If your account uses PPP over Ethernet (PPPoE), you will need to enter your login name and password
when configuring your MH-1000. After the network and firewall are configured, MH-1000 will login
automatically, and you will no longer need to run the login program from your PC.
3.5.2 Web Configuration Interface
MH-1000 includes a Web Configuration Interface for easy administration via virtually any browser on your
network. To access this interface, open your web browser, enter the IP address of your router, which by
default is 192.168.1.1, and click Go. A user name and password window prompt will appear. Enter your
user name and password (the default user name and password are "admin" and "admin") to access the
Web Configuration Interface.
If the Web Configuration Interface appears, congratulations! You are now ready to configure your MH-1000.
If you are having trouble accessing the interface, please refer to Chapter 5: Troubleshooting for possible
resolutions.
Multi-Homing Security Gateway User's Manual
- 26 -