Planet Networking & Communication MH-1000 User Manual page 75

Multi-Homing Security Gateway User's Manual
Auth. Type: The authentication type, Pap or Chap, PaP, Chap.
Data Encryption: Select Enable or Disable the Data Encryption.
Encryption Key Length: Auto, 40 bits or 128 bits.
Peer Encryption Mode: Only Stateless or Allow Stateless and Stateful.
IP Addresses Assigned to Peer Start from: 192.168.1.x: please input the IP assigned range from 1 ~ 254
(except MH-1000's LAN IP address with 192.168.1.1 as MH-1000's default LAN IP address and IP pool
range of DHCP server settings with 100~199 as MH-1000's default DHCP IP pool range.)
Idle Timeout " " Min: Specify the time for remote peer to be disconnected without any activities, from
0~120.
Click Create to create a new PPTP VPN connection account.
Connection Name: A user-defined name for the connection.
Tunnel: Select Enable to activate this tunnel. Select Disable to deactivate this tunnel.
Username: Please input the username for this account.
Password: Please input the password for this account.
Retype Password: Please repeat the same password as previous field.
Connection Type: Select Remote Access for single user, Select LAN to LAN for remote gateway.
Peer Network IP: Please input the IP for remote network.
Peer Netmask: Please input the Netmask for remote network.
Netbios Broadcast: Allows MH-1000 to send local Netbios Broadcast packets through the PPTP Tunnel,
please select Enable or Disable.
4.4.7 QoS
MH-1000 can optimize your bandwidth by assigning priority to both inbound and outbound data with QoS.
This menu allows you to configure QoS for both inbound and outbound traffic.
- 71 -