Planet Networking & Communication MH-1000 User Manual page 61

Multi-Homing Security Gateway User's Manual
4.4.5.1 Packet Filter
The Packet Filter function is used to limit user access to certain sites on the Internet or LAN. The Filter
Table displays all current filter rules. If there is an entry in the Filter Table, you can click Edit to modify the
setting of this entry, click Delete to remove this entry, or click Move to change this entry's priority.
When the entry is upper, the priority is higher.
To create a new filter rule, click Create.
ID: This is an identify that allows you to move the rule by before or after an ID.
Rule: Enable or Disable this entry.
Action When Matched: Select to Drop or Forward the packet specified in this filter entry.
Direction: Incoming Packet Filter rules prevent unauthorized computers or applications accessing your
local network from the Internet. Outgoing Packet Filter rules prevent unauthorized computers or
applications accessing the Internet. Select if the new filter rule is incoming or outgoing.
Source IP: Select Any, Subnet, IP Range or Single Address.
- Starting IP Address: Enter the source IP or starting source IP address this filter rule is to be applied.
- 57 -