Planet Networking & Communication MH-1000 User Manual page 72

- FQDN DNS (Fully Qualified Domain Name): Consists of a hostname and domain name. For
example, WWW.VPN.COM is a FQDN. WWW is the host name, VPN.COM is the domain name. When you
enter the FQDN of the local host, the router will automatically seek the IP address of the FQDN.
- FQUN E-Mail (Fully Qualified User Name): Consists of a username and its domain name. For
example, user@vpn.com is a FQUN. "user" is the username and "vpn.com" is the domain name.
- Data: Enter the ID data using the specific ID type.
Network: Set the IP address, IP range, subnet, or address range of the local network.
- Any Local Address: Will enable any local address on the network.
- Subnet: The subnet of the local network. Selecting this option enables you to enter an IP address
and netmask.
- IP Range: The IP Range of the local network.
- Single Address: The IP address of the local host.
Remote: This section configures the remote host.
Secure Gateway Address (or Domain Name): The IP address or hostname of the remote VPN device
that is connected and establishes a VPN tunnel.
ID: The identity type of the local host. Choose from the following three options:
- Remote IP Address: Automatically use the remote gateway Address as ID.
- IP Address: Use an IP address format.
- FQDN DNS (Fully Qualified Domain Name): Consists of a hostname and domain name. For
example, WWW.VPN.COM is a FQDN. WWW is the host name, VPN.COM is the domain name. When you
enter the FQDN of the local host, the router will automatically seek the IP address of the FQDN.
- FQUN E-Mail (Fully Qualified User Name): Consists of a username and its domain name. For
example, user@vpn.com is a FQUN. "user" is the username and "vpn.com" is the domain name.
- Data: Enter the ID data using the specific ID type.
Network: Set the subnet, IP Range, single address, or gateway address of the remote network.
- Any Local Address: Will enable any local address on the network.
- Subnet: The subnet of the remote network. Selecting this option allows you to enter an IP
address and netmask.
- IP Range: The IP Range of the remote network.
- Single Address: The IP address of the remote host.
- Gateway Address: The gateway address of the remote host.
Proposal:
Secure Association (SA): SA is a method of establishing a security policy between two points. There
are three methods of creating SA, each varying in degrees of security and speed of negotiation:
- Main Mode: Uses the automated Internet Key Exchange (IKE) setup; most secure method with
the highest level of security.
- Aggressive Mode: Uses the automated Internet Key Exchange (IKE) setup; mid-level security.
Speed is faster than Main mode.
- Manual Key: Standard level of security. It is the fastest of the three methods.
Multi-Homing Security Gateway User's Manual
- 68 -