Time Synchronization; Backup/Flash Firmware; Reboot - Planet Networking & Communication HAC-1000 User Manual

3.3.3 Time Synchronization

Synchronizing the system time.

3.3.4 Backup/Flash Firmware

Parameters
Backup
Reset to default
Recovery
Upgrade Firmware

3.3.5 Reboot

Reboot the control gateway.
Description
To have a backup of all of the parameters, click this button. If
necessary, it will then be possible to return to the previous settings if
settings are changed and there is unexpected behavior.
Click "Generate archive" to download a tar archive of the current
configuration files.
To reset the firmware to its initial state, click "Perform reset" (only
possible with squashfs images).
Clicking the Perform reset button will reset gateway's parameters to
the factory settings (including the IP address).
To restore configuration files, you can upload a previously generated
backup archive here.
Click "Browse" to select the OpenWrt compatible firmware image,
and click "Flash image" to upload a new firmware.
16
- -
Z-Wave Home Automation Control Gateway
HAC-1000