Specification - Planet Networking & Communication MH-1000 User Manual

Port or button Description
RESET To reset device and restore factory default settings, after
the device is fully booted, press and hold RESET until the
Status LED begins to blink.
WAN 1, Connect to your xDSL/Cable modem or other Internet
WAN2 connection devices
LAN 1- 8 Connect to your local PC, switch or other local network
device
DC 12V Connect DC Power Adapter here (12VDC)

1.5 Specification

Product
Model
Hardware
Ethernet
LAN
WAN
Performance
Firewall throughput
IPSec VPN throughput
PPTP VPN throughput
Maximum Concurrent
sessions
Software
Management
Network Protocol and
features
Load Balancing
Firewall
Content Filtering
VPN Tunnels
VPN Functions
QoS
Log and Alert
Multi-homing Security Gateway
MH-1000
8 x 10/100 Based-TX RJ-45
2 x 10/100 Based-TX RJ-45
90Mbps
30Mbps
10Mbps
10,000
Web
Static IP, PPPoE, PPTP, Big Pond and DHCP client connection to ISP
NAT, Static Route, RIP-2
Dynamic Domain Name System (DDNS)
Virtual Server and DMZ
DHCP server
NTP
Increased bandwidth of outbound and inbound trafficDNS inbound load
balance
Srateful Packet Inspection (SPI) and Denial of Service (DoS) prevention
Packet Filter (by IP, port number and packet type)
E-mail alert and logs of attack
MAC Address Filtering
URL Filtering
Java Applet/Active X/Web Proxy/Surfing of IP Address/Cookie Blocking
IPSec: 100, PPTP: 4
PPTP, IPSec VPN support
DES, 3DES and AES encrypting
SHA-1 / MD5 authentication algorithm
Remote access VPN (Client-to-Site) and Site to Site VPN
IPSec, PPTP, L2TP pass through
Support DiffServ approach
Prioritization and bandwidth managed by IP, Port number and MAC address
Syslog support
E-mail Alert
- 3 -
Multi-Homing Security Gateway User's Manual