Planet Networking & Communication MH-1000 User Manual page 81

External Port: Enter the port number of the service that will be sent to the Internal IP address.
Redirect Port: Enter a new port number for the service that will be sent to the Internal IP address.
Internal IP Address: Enter the LAN server/host IP address that the service request from the Internet will
be sent to.
Candidates: You can also select the Candidates which are referred from the ARP table for automatic input.
NOTE: You need to give your LAN server/host a static IP address for the Virtual Server to work properly.
Click Apply to save your changes.
Using port forwarding does have security implications, as outside users will be able to connect to PCs on
your network. For this reason, using specific Virtual Server entries just for the ports your application
requires, instead of using DMZ is recommended.
4.4.9 Advanced
Configuration options within the Advanced section are for users who wish to take advantage of the more
advanced features of MH-1000. Users who do not understand the features should not attempt to
reconfigure their router, unless advised to do so by support staff.
There are three items within the Advanced section: Static Route, Dynamic DNS and Device
Management.
4.4.9.1 Static Route
The static route settings enable the router to route IP packets to another network (subnet). The routing
table stores the routing information so the router knows where to redirect the IP packets.
Multi-Homing Security Gateway User's Manual
- 77 -