Planet Networking & Communication MH-1000 User Manual page 51

- Balance by Traffic weight: Balances traffic based on a traffic weight ratio. Enter the desired ratio into
the blanks provided.
Based on IP hash mechanism: The source IP address and destination IP address will go through specific
WAN port (WAN1 or WAN2) according to policy settings in this mechanism. This will assure that some
applications will work when it would like to authenticate the source IP address.
- Balance by weight of link capacity: Uses an IP hash to balance traffic based on weight of link
bandwidth capacity.
- Balance by weight: Uses an IP hash to balance traffic based on a ratio. Enter the desired ratio into the
blanks provided.
Click Apply to save your changes.
4.4.3.3 Inbound Load Balance
Function: Used to enable or disable inbound load balancing.
DNS Server 1: DNS Server 1 settings including Host URL mappings.
DNS Server 2: DNS Server 2 settings including Host URL mappings.
To edit server settings, click Edit. The following example illustrates DNS Server 1 settings. DNS Server 2
settings follow a similar procedure.
Multi-Homing Security Gateway User's Manual
- 47 -