Table of Contents
Advertisement
4.4 Configuration
The Configuration menu allows you to set many of the operating parameters of MH-1000. In this menu,
you will find the following sections:
- LAN
- WAN
- Dual WAN
- System
- Firewall
- VPN
- QoS
- Virtual Server
- Advanced
These items are described below in the following sections.
4.4.1 LAN
There are two items within this section: Ethernet and DHCP Server.
4.4.1.1 Ethernet
IP Address: Enter the internal LAN IP address for MH-1000 (192.168.1.1 by default).
Subnet Mask: Enter the subnet mask (255.255.255.0 by default).
RIP: RIP v2 Broadcast and RIP v2 Multicast. Check to enable RIP.
Multi-Homing Security Gateway User's Manual
- 37 -
Advertisement
Table of Contents
